Trying to fix a sliding glass door that is off the track can be a daunting task. The problem could be due to poor installation, bent tracks, or even faulty rollers. It’s important to understand the symptoms of a door that is off the track before you start fixing it. The key is to get the door back in place and make sure it is properly lubricated.
Steps to Fix Sliding Glass Door That is Off the Track
First Step:
First, you should remove the glass door from the frame. This will allow you to gain access to the glide track. You can use a flat-head screwdriver to unscrew the bottom bracket and the middle bracket. You may also need to use a small prying tool to remove plastic plugs. Then, you can sand the track using a piece of sanding stone.
Second:
You can also use a screwdriver to loosen the top adjustment screws. These screws can be rotated to allow you to slide the door. You can also use a reciprocating saw to cut through the sealing material. If your tracks haven’t been lubricated, you may need to use powdered graphite to loosen them. You can then test the new track to see if it works.
Third:
If the track is dirty, you may need to clean it. You can also use a vacuum attachment to remove dust. You should also lubricate the track with paraffin or silicone spray. You should check the track for scratches after each adjustment. Another problem with sliding glass doors is that they can get jammed or bounce when you try to slide them. This can make them difficult to open and close. There are many ways to fix this. You can either try to repair the door yourself, or you can hire a professional. Using a professional can also save you money in the long run. If the problem is with the track, a professional will be able to inspect the track for problems.
Fourth:
One of the easiest ways to fix a sliding glass door that is not sliding is to add padding. The padding helps to protect the glass door from damage. You can also add a foam sheet to the floor to prevent scratches. Changing the wheel height can also help. You will need a screwdriver to adjust the wheel height. You should also measure the length of the door to make sure it’s not too short. A broken pane can also cause problems with sliding glass doors. A glass doctor can help you fix these issues. You may also need to replace the glass or replace the trim. You can also replace the rollers. Using a sander, you can narrow wide spots in the track. If the track is severely bent, you may need to get a professional to fix it for you. You can also use a hammer to re-align the track. If you do decide to fix it yourself, you can also use a small block of wood to distribute the force of the blow.
Contact a Professional Glass Door Repair Company
If you have tried DIY to repair the sliding glass door with no success the best thing you could do is to contact a sliding glass door repair company for them to offer their professional skills and get it fixed for you. You can reach MVP doors at (305) 462-5119.
Related: